LORENZ PULSE 5 (LP5)
The LORENZ PULSE 5 is a very versatile metal detecting system which was designed to locate both small and large metal objects. Different Searchcoils ranging from 10�� (26 cm) diameter to 80� x 80� (2 x 2 m) frame mounted coils can be connected to the LORENZ PULSE 5.
A special feature automatically adapts different searchcoils to the electronics. There is just one Detector necessary which offers best performance with any coil connected.
The LORENZ PULSE 5 is based on the Pulse Induction principle which guarantees extreme detection depths even in soils with high contents of ironoxides or conducting saltwater.
The LORENZ PULSE 5 responds very sensitively and precisely to small non-ferrous metal objects like coins for example. A target classification with conductivity meter reading offers more information in order to identify metal objects.
Small unwanted metal objects like nails for example can be eliminated with three different delay settings. Especially while searching for large and deep targets with frame mounted searchcoils, small unwanted items will be eliminated automatically.
A wide range of searchcoils are available as accessory. Different sized frame mounted searchcoils can be easily made from PVC pipes and the universal cablecoil (accessory).
The maximum detection range of a 40�� x 40�� (1 x 1 m) frame mounted coil is 217�� (5,5 m) and can be increased to 315�� (8 m) when enlarging the frame to 80�� x 80�� (2 x 2 m).
The LORENZ PULSE 5 can be used for many different search and location applications like the detection of coins, metal fragments or barrels at detection depths of several meters. The LORENZ PULSE 5 guarantees best performance even under the worst environmental conditions.
Dimensions / Weight:
Electronic unit with leathercase: 23 x 17 x 7 cm (2,3 Kg)
Carrying case with standard equipment: 40 x 30 x 16,5 cm (5,4 Kg)
1m x 1m PVC-frame coil (disassembled): 110 x 15 x 15 cm (2,5 Kg)
Telescopic pole with armrest min/max length: 100 / 126 cm (0,5 Kg)
Electrical data:
Operation frequency: small / large coils connected: 1300 / 700 pulses per sec.
Audio frequency: Voltage controlled oscillator: 0 � 13000 Hz
Power source: built-in 12 V / 3 Ah NiMh rechargeable battery
Usage time: approx. 8 - 12 hours depending on temperature and coil connected
Batt. charger: Rapid charger with interchangeable AC-plug (96 - 264 V) for worldwide operation
Recharge time: max. 2,5 h on empty battery
Operating temp.: Charger 0 - +40°C / LP 5 electronics unit -5 - +55°C
Searchcoils: electrostatic insulated (shielded), waterproof
| Metal object / Search coil | 35cm DD-coil | 45cm coil | 1 x 1m PVC-frame or uni. cable coil |
2 x 2m uni. cable coil |
|---|---|---|---|---|
| X: Metal object is too small and out of the detection range of the used searchcoil. Detection depths recorded in medium air; MODE-switch at position 1 or DISC | ||||
| Silvercoin d = 13 mm |
29cm | 31cm | X | X |
| Goldcoin d = 20 mm |
40cm | 45cm | X | X |
| Brass sheet 10 x 10 cm |
80cm | 100cm | 140cm | 150cm |
| Soft drink can 0,33 l |
100cm | 125cm | 150cm | 170cm |
| Iron box 30 x 18 x 15 cm |
150cm | 180cm | 260cm | 310cm |
Front panel - LP5
1: ZERO
Zero-pushbutton-control: Automatically retunes the complete electronics while pressing.
2: AUDIO
Audio-threshold-control: The initial tick-rate can be altered from silent to a slow ticking-tone.
3: MODE control
- Turns the LORENZ PULSE 5 on / off
- Displays the condition of the battery on the meter
- Selects the target classification with conductivity meter reading (displays and stores a specific number 0 - 100 depending on the kind of metal detected )
- Three discrimination settings for eliminating small objects
4: FREQ.
Frequency control: The preset operation frequency can be altered to reduce interferences produced by powerlines or transmitters.
5: Blue discriminator - light
Indicates that a new conductivity meter reading is stored and displayed on the meter.
6: Red battery - indicator - light
Comes on when the Battery is discharged.
7: Meter indication for
- Battery condition
- Conductivity meter reading
- Intensity / signal strength
Standard equipment - LP5
- LP 5 electronics control box
- Leather case for LP 5 with shoulder and belt strap
- Rapid charger with wide range AC - input (96 - 264 V)
- AC - plug for charger (Euro / USA / UK / Australia)
- Headphones
- Operating manual (German + English)
- Carrying case for LP 5